Home » Home Improvement » Planning A Cantilever Storage Rack System

Planning A Cantilever Storage Rack System

A lot of factors go into the successful planning and installation of cantilever storage racks, but everything will revolve around the answer to a single question: what kind of products are you planning to store? As you consider the items, include the height, shape, length, weight and depth of the items. Once the answer is finalized, determining the appropriate braces, uprights and arms can be quickly determined.

Spacing and Number of Arms

Remember, there must be an adequate amount of support, enough to avoid something called load deflection. This part is crucial because the deflection will likely damage to the items being placed as well as the cantilever storage rack’s arms. When detecting deflection, put the products on top of two blocks made of wood, when no deflection take place then it’s safe to install two arm systems; this is practical as long as overloading is averted. In case deflection does occur, add more arms until deemed safe.

Length of the Arms

It’s important that the product or item’s length doesn’t exceed the length of the cantilever storage rack’s arm. Let’s say that the steel bundles are twenty four inches wide, then the arms has to also be twenty four inches in length.

The Upright’s Height

In determining the upright’s height, be mindful of certain factors like the height of the ceiling, sprinkler systems and forklift reach. Apart from that, there may be local building policies and codes that factor in; all these, when put together, influences the height of the upright. Basically, the height is computed by adding the number of items that will be stored, thickness of the arms plus six inches as clearance for the next arm and height of the base. If you’re doubtful of your computation, contact professionals for the total dimension.